We all use Wireless routers to access the Wireless Internet on your PC, Laptop, and Smartphone device. For using the router, it is important to know how to log in through admin wireless setup. So, we are here to assist you. In this guide, we are going to share the instructions for the admin wireless setup. Follow the guidelines carefully to complete the process. is basically a default IP Address for the routers. Most of the router manufacturers use this address for the router setup and configurations. Check out the router manual carefully and you can complete the setup without any hassle.

 You have to set the PC as and the subnet mask as and the default gateway as With these settings saved on your system, you can continue with the setup process. Admin Wireless Setup

Setting Up a Wireless Router:

 Start by connecting your Wireless Router to the power outlet and turn it on. Check and make sure that you connect the Wireless modem to your router. 

  • To start the wireless router setup, open an internet browser on your PC. Type the default IP Address in the address bar. 
  • This will direct you to the router’s admin page and ask you to provide a username and password. 
  • To use the default username and password, you can check the backside of your router as it is printed there. Just turn it around and there you will see a sticker with printer default username and password. 
  •  For the router setup, the default username could be ‘admin’ or you can leave the field blank. The default password is ‘admin’ or leaves the field blank. 
  • Now, go to the ‘Setup Wizard’ page or the ‘Wireless Section’ of your router. 
  •  Choose an option ‘Enable Wireless’, so that you can connect the Wireless Section to other devices.
  •  Choose the default selection to schedule wireless as ‘Always’. 
  • Now, you have to enter the Wireless Router’s personalized name. The Wireless Router is also known as SSID. Here, you need to enter the name which does not contain any information that could be accessed from an unauthorized entity or hacked. 
  • Choose WPA -Personal or WPA 2 as the security type. 
  •  You have to enter the other passkey, personal key or password for the wireless connectivity. The key must contain at least eight characters that involve lower case, upper case, numbers, alphabets, and special characters.

With these basic instructions, you can complete the wireless router setup without any hassle. This is all you need to do for the wireless configuration. You can find the other configuration settings on the admin page of the router. All you need is to go with the basic settings and set a strong password. This will help you to complete the setup and access the wireless internet without any hassle.