For using the Netgear Router, a user needs to login to it and in this guide, we are going to discuss the entire process of Netgear Router Login. You can log in to the router remotely as well locally. For the router login using the direct connection, you need to connect the ethernet cable from the Netgear router. Below, we are sharing the simple steps that can help you complete the Netgear Router login process easily. Follow the mentioned guidelines very carefully to complete the process without any hassle.

Let’s Get Started

  • Attach one end of the network cable to ‘Port 1’ present on the backside of your wireless router. 
  • Take the other end of the cable and attach it to your computer or laptop to the RJ45/network port. 
  • Make sure that your computer and laptop are turned on and getting proper power supply. The system must be completed booted up to the ‘Ready’ state. 
  • Insert the power cord to the backside of your Netgear Router. Connect the AC power adapter to a power outlet. 
  • Let the Wireless Netgear Login power up completely, this will take a few minutes. Wait until the device gets ready for the operation. 

This way the user can get connected directly to Netgear Wireless router login. If a user wants to login wirelessly, process with the next steps: 

Logging In Wirelessly

 If you have previously configured the Netgear router, you can view the login box just by opening the Internet browser on your computer and typing in the Internal IP Network Address of the router. 

Here are the steps to follow:

  • Open the Internet browser on your computer. 
  • Go to the address bar and enter the IP address of the router and that is or You can also use to login to your Netgear Router. 
  • The login box of the router will appear on the screen and ask you to provide the username and password details. By default, the username is ‘admin’ and the password is ‘password’, 

If you have changed the default settings of the Netgear Router and you have to gain the wireless router access, then you can reset the router to its default settings by following the reset process. 

  • Tap on the Ok button for Netgear Router login on your device. 

Remote Router login 

If you want to access the Netgear Router login default remotely on the network you have to set up the router for providing access through one of the router’s port from outside the firewall. 

Once you have logged in to the router and view the configuration screen and basic setup, then proceed with the following steps: 

  • Choose ‘Advanced>> Remote Management’. 
  • To enable ‘Remote Management’, tick the box present next to the ‘Remote Management On’. 
  • Under the ‘Remote Management Address’ section, you can choose either from ‘Only this computer’, ‘IP Address Range’ or ‘Everyone’, giving the one or more computers an ability of Netgear router login and execute the duties of remote management. 
  • The selection of port numbers must be left at its default Port assignment 8080. 
  • Click on ‘Apply’ and save the settings. 
  •  If you want to access the ‘Default Netgear Router Login box’ from another system across the internet then just open a web browser and enter the router external WAN IP address followed by the ‘Colon’ and Port Number 8080’.

This will present you with the Default Netgear Router Login box from where you can perform the remote management tasks.